Closed position indicator, CPI 400
indicates closed and open position by a lamp. Interlock switch for electrical signal SPDT 10A @ 120 VAC.

max. operating pressure: 7 PSI
test volume: 0.14 cft
sensitivity limit: <2.0 cft/hr
test cycle: approx. 10 to 30 s
ambient temperature: +5 to +140°F

max. operating pressure: 5 PSI
test volume: 0.71 cft
sensitivity limit: <2.0 cft/hr
test cycle: approx. 32 s
ambient temperature: +14 to +140°F

CM 100/101
Control module(not shown); used with VPS or VDK when checking on start and shut down is required.

GMH locks out and indicates when the pressure exceeds the set-point.
GML locks out and indicates when the pressure is below the set-point.

G...-A2-4...Pressure Switches are to be used on DMV valves.
G...-A4-4...Pressure Switches are to be used with 1/4" NPT pipe.

ambient temperature:  -40 to +140°F
enclosure: NEMA 4, indoor use only
switch rating: SPDT 10A @ 120 VAC
visual indication: neon light
ventless
Gas pressure switch set-point ranges:
0.16 to 1.20" wc, 0.40 to 4.00" wc,
2.00 to 20.00" wc, 12.00 to 60.00" wc,
40.00 to 200.00" wc

PAGE 4

Next Page